Products / Gasket Makers / EMS FORCE GM-10 High Temperature Resistant Gasket Maker

EMS FORCE GM-10 High Temperature Resistant Gasket Maker

Information

- GM-10 is pink coloured, high-temperature resistant, fast curing liquid gasket maker used in all metal parts.

- Seals perfectly at temperatures up to 200°C.

High temperature resistance

Fast setting

Features and Applications

Features

  • Seals perfectly at temperatures up to 200°C.
  • Can be applied in every position at high temperatures

Application

  • Fuel and water pumps, bearing boxes, engine thermostats, air compressors, pumps in various combinations, fuel tanks, etc.

Usage and Instructions

Surface Preparation

1)

Ensure parts are clean, dry and free from oil and grease.

Application

1)

Clean surfaces before assembly. If possible use sandpaper before cleaning.

2)

If curing speed is low due to inactive metal surface or high surface gap, AC-64 Anaerobic Activator should be applied to surfaces before adhesive.

3)

Apply the adhesive to both surfaces

4)

Roller or brush can be used to apply adhesive.

5)

Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of gasketing compound.

6)

For disassembly, use hand tools to remove mating parts.

7)

When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.

Technical Details

Average handling time

20 minutes

Conditions: 22°C
Colour

Pink

Corrosive

Non-corrosive

Flash Point

>93°C

Gap Filling

up to 0.4mm

Shelf Life

24 months

Specific Gravity

1.1

Temperature range

from -50°C to +200°C

Viscosity

100000-150000 cPs (@2.5 rpm)

Package Size

Inventory Code Product Code Packaging Inner box Box Palette
41672 GM-10 ACORDEON 50 ml 12 72 4,608
41472 GM-10 50 ml 12 72 4,608
41572 GM-10 250 ml 9 54 1,620
Technical Information Line : +90 444 0 649
Working Hours : 07:30 - 17:30 (GMT+3)
Working Days : Monday - Friday