General purpose, high strength thixotropic anaerobic threadlocker.
- Provide resistance to vibration
- Removable when heat applied.
General purpose, high strength thixotropic anaerobic threadlocker.
- Provide resistance to vibration
- Removable when heat applied.
Clean male and female threads before assembly with an absorbent tissue paper to remove any cutting oil.
Apply the adhesive with a 360 turn to leading first three threads of the male and female fittings.
Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.
Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.
For disassembly, use hand tools to remove mating parts.
When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.
Green
Non-corrosive
>93°C
up to 0.15mm
24 Months
1.040
-50°C to +150°C
3000 - 4000 cPs (@20 rpm)
Inventory Code | Product Code | Packaging | Inner box | Box | Palette |
---|---|---|---|---|---|
11518 | TL-70 | 15 ml | 24 | 144 | 8,640 |
11519 | TL-70 | 50 ml | 10 | 120 | 4,320 |
11520 | TL-70 | 250 ml | 6 | 36 | 1,296 |
© Metsan Endüstriyel Yapıştırıcılar 2024. All Rights reserved.