Ensure parts are clean, dry and free from oil and grease.

​​​​​​​ Applied with a brush or directly from tube.

Apply the adhesive with a 360 turn to first three leading threads of the male and female fittings.

Use an absorbent tissue paper to wipe off excess jointing compound in the direction of the thread.

Assembly parts and hold on for 24 hours at 22-24°C to ensure full curing of jointing compound.

For disassembly, use hand tools to remove mating parts.

When it is hard to dissemble at room temperature, apply local heat until reaching 250°C and disassemble while hot. Then, remove any residual cured adhesive mechanically and clean parts with a proper solvent, acetone.